Got some more more keychains and Corn Holders up for grabs
Full size pics here: Corn Holders:
RULES:
-First "I'll take it", gets it.
-Shipping is $6 flat PER ORDER, (it doesn't matter how many items you buy). Shipped via USPS with Tracking.
-I accept PP G&S (I'll send a discreet invoice which can be paid via credit card, Paypal, etc), or CASH if local pick up in Lehigh Valley, PA
Had some poor M16A1’s that had an unavoidable date with the crusher to be legally DESTROYED, but was able to salvage the neato roll marks from the destroyed receivers. So decided to make some keychains outta them. I added some more patterns and had cut them in about 14 different shapes and sizes before doing some polls and having the masses pick the 2x most popular types a couple of years ago. It's taken me a while to sneak in some shop time throughout the year to finally finish them.
These were surplus A1's that were purposefully CRUSHED into multiple pieces to legally destroy them (quite a few out the batch were unusable so I ended up with a BIG pile of scrap), so expect some scuffs and such (especially on the back since that's where mags were being inserted). most will have some dents/discoloration on the back (non-rollstamp side) which for the most part does not affect the front quality- I did my best to sort them into condition categories and picture any extra wear that specific pieces might have. Same for the Colt ROLL MARK - they were mass produced surplus from 50 years ago so there will be slight depth variations. I color-filled the roll marks with white paint so that roll marks stand out nicely. The white paint can be easily removed with some brake cleaner or similar if so desired.
I have made A BUNCH of different types throughout the years, so I am open to custom orders too
THE MAIN 2x DIFFERENT TYPES:
Pattern #14 - Smaller: Approximately 1"x 1.75", key ring hole in TOP LEFT Corner, but could try other corner if requested by buyer
Pattern #9 - Larger: Approximately 1.2"x 2", key ring hole in BOTTOM Middle or can be in the corners, buyer's preference if not already drilled
Types of keyrings available (let me know which you'd prefer)
-Brass Round Ring / -Brass Flat Ring 1"
-Black Round Ring / -Black Flat Ring 1"
-Black Round Ring 1.25"
Brass Round Ring / Brass Flat Ring 1"
Black Round Ring / Black Flat Ring 1"
Black Round Ring 1.25"
Oval row:
9524058 :$75
9539019 :$75
BLEM 9466222 -very small crack and lots of shallow dents all over face (do not affect function): $70
Punch tip pointing to very small crack in the right side of the "M" in "M16A1" of BLEM 946222:
Medium front plates:
9407004: $110
9276026 - has tiny crack on left edge (does not affect function): $100
9522567 - has some anodizing cracking/crazing in top right corner: $100
Punch tips pointing to tiny crack on left edge 9276026, and anodizing crazing on top right corner 9522567:
Large front plates:
9539447: $120
9400520- has a tiny crack and anodizing crazing in top right corner: $115
9406197 - has a tiny crack through "CAL" and anodizing crazing in top right corner: $115
Close up of tiny cracks pointed to by punches (9400520 and 9406197):
Close up of corner anodizing crazing 9406197:
Pattern #9 - Larger rectangle: Approximately 1.2"x 2"
9463904: $80
9331386: $80
9506247: $80
9477323: $80
9276196 - crazing top right corner: $75
9466531 - crack through center and bend to piece: $70
9276196 crazing left edge, and 9466531 crack:
9466531 significant bend:
Pattern #14 - Smaller rectangle: Approximately 1"x 1.75", key ring hole in TOP LEFT Corner
9517337: $80
9414597: $80
9463659: $80
9515062: $80
9404934 - anodizing crazing top right corner: $75
9266831 - anodizing crazing top right corner: $75
9533840 - tiny crack through "CAL": $75
9533849 - crack through logo and part of "MM" missing on right edge: $70
Crazing 9404934 and 9266831:
Tiny crack 9533840 through "CAL", and tiny crack through logo 9533849, also missing part of "MM"
Colt Firearms Division rollmark keychains:
Small cracks #4 and #5:
Small cracks #10 and #11
1: $45
2: $45
3: $45
4: $50
5: $50
6: $50
7: $60
8: $60 SOLD
9: $60 SOLD
10: $70
11: $70
Can also cut other shape keychains and magnets, EXAMPLES:
-
-
-
M16 Corn Holders $15 each +shipping -- Lots of sets/packs available
New in packaging, corn holders are plastic with stainless steel barbs. Each pack is 4 sets of 2 corn holders (so 8 individual pieces per package)
Full size pics here: Corn Holders:
RULES:
-First "I'll take it", gets it.
-Shipping is $6 flat PER ORDER, (it doesn't matter how many items you buy). Shipped via USPS with Tracking.
-I accept PP G&S (I'll send a discreet invoice which can be paid via credit card, Paypal, etc), or CASH if local pick up in Lehigh Valley, PA
Had some poor M16A1’s that had an unavoidable date with the crusher to be legally DESTROYED, but was able to salvage the neato roll marks from the destroyed receivers. So decided to make some keychains outta them. I added some more patterns and had cut them in about 14 different shapes and sizes before doing some polls and having the masses pick the 2x most popular types a couple of years ago. It's taken me a while to sneak in some shop time throughout the year to finally finish them.
These were surplus A1's that were purposefully CRUSHED into multiple pieces to legally destroy them (quite a few out the batch were unusable so I ended up with a BIG pile of scrap), so expect some scuffs and such (especially on the back since that's where mags were being inserted). most will have some dents/discoloration on the back (non-rollstamp side) which for the most part does not affect the front quality- I did my best to sort them into condition categories and picture any extra wear that specific pieces might have. Same for the Colt ROLL MARK - they were mass produced surplus from 50 years ago so there will be slight depth variations. I color-filled the roll marks with white paint so that roll marks stand out nicely. The white paint can be easily removed with some brake cleaner or similar if so desired.
I have made A BUNCH of different types throughout the years, so I am open to custom orders too
THE MAIN 2x DIFFERENT TYPES:
Pattern #14 - Smaller: Approximately 1"x 1.75", key ring hole in TOP LEFT Corner, but could try other corner if requested by buyer
Pattern #9 - Larger: Approximately 1.2"x 2", key ring hole in BOTTOM Middle or can be in the corners, buyer's preference if not already drilled
Types of keyrings available (let me know which you'd prefer)
-Brass Round Ring / -Brass Flat Ring 1"
-Black Round Ring / -Black Flat Ring 1"
-Black Round Ring 1.25"
Brass Round Ring / Brass Flat Ring 1"
Black Round Ring / Black Flat Ring 1"
Black Round Ring 1.25"
Oval row:
9524058 :$75
9539019 :$75
BLEM 9466222 -very small crack and lots of shallow dents all over face (do not affect function): $70
Punch tip pointing to very small crack in the right side of the "M" in "M16A1" of BLEM 946222:
Medium front plates:
9407004: $110
9276026 - has tiny crack on left edge (does not affect function): $100
9522567 - has some anodizing cracking/crazing in top right corner: $100
Punch tips pointing to tiny crack on left edge 9276026, and anodizing crazing on top right corner 9522567:
Large front plates:
9539447: $120
9400520- has a tiny crack and anodizing crazing in top right corner: $115
9406197 - has a tiny crack through "CAL" and anodizing crazing in top right corner: $115
Close up of tiny cracks pointed to by punches (9400520 and 9406197):
Close up of corner anodizing crazing 9406197:
Pattern #9 - Larger rectangle: Approximately 1.2"x 2"
9463904: $80
9331386: $80
9506247: $80
9477323: $80
9276196 - crazing top right corner: $75
9466531 - crack through center and bend to piece: $70
9276196 crazing left edge, and 9466531 crack:
9466531 significant bend:
Pattern #14 - Smaller rectangle: Approximately 1"x 1.75", key ring hole in TOP LEFT Corner
9517337: $80
9414597: $80
9463659: $80
9515062: $80
9404934 - anodizing crazing top right corner: $75
9266831 - anodizing crazing top right corner: $75
9533840 - tiny crack through "CAL": $75
9533849 - crack through logo and part of "MM" missing on right edge: $70
Crazing 9404934 and 9266831:
Tiny crack 9533840 through "CAL", and tiny crack through logo 9533849, also missing part of "MM"
Colt Firearms Division rollmark keychains:
Small cracks #4 and #5:
Small cracks #10 and #11
1: $45
2: $45
3: $45
4: $50
5: $50
6: $50
7: $60
8: $60 SOLD
9: $60 SOLD
10: $70
11: $70
Can also cut other shape keychains and magnets, EXAMPLES:
-
-
-
M16 Corn Holders $15 each +shipping -- Lots of sets/packs available
New in packaging, corn holders are plastic with stainless steel barbs. Each pack is 4 sets of 2 corn holders (so 8 individual pieces per package)
