Hello, all!
(PLEASE be sure to check out my Russian & Bulgarian AK mag thread.)
7/30/25 UPDATE: Colt 10.3" CQBR complete upper, LMT L8A, SOPMOD stock & KAC RAS bottom rail added.
7/5/2025 UPDATE: V-Seven PDW upper added.
5/9/2025 UPDATE: Benelli parts added.
Today I’m listing a number of odds & ends that I have. Several optics, barrels, barrel kits & anything else I have that needs to go. I’ll be adding various AR parts over the next few weeks.
First, “I’ll take [item name]!” reply or PM wins.
I can only accept Ca$hApp & Zelle.
Shipping will be actual USPS Priority Mail rates. Estimates available on request.
I will print out & include a receipt for records & insurance purposes.
If you have any questions, just shoot me a PM! If you need a better picture of something, just let me know.
--------------------------------------------------------------
Uppers:
--------------------------------------------------------------
V-Seven 7.5" 5.56mm complete upper: $1,050
This is a V-Seven 7.5" 5.56mm complete upper. It includes a V7 7075 Enlightened receiver, V7 Ti port door & rod, V7 2099 Ultra-light M-lok 9.2" forend w/ Ti screws, V7 SS 7.5" match 5.56mm bbl, V7 Ti Helios linear comp, V7 NiB BCG & Radian Raptor charging handle in black. I have put 4 30rd mags through it just to function test it. Runs like a top!
Additional Photo 1
Additional Photo 2
Additional Photo 3
Additional Photo 4
Additional Photo 5
--------------------------------------------------------------
Colt 10.3" CQBR complete upper: $950
This is a Colt factory M4LE (6921LE) 14.5" bbl'd upper that had its bbl shortened to 10.3" by Specialized Armament Warehouse. They also opened the gas port to 0.071". This is a "keyhole" C-marked, Cerro forge upper & the bolt is C-marked via engraving. It has the original M4 double-shielded handguards, standard charging handle & A2 flash hider. This upper was purchased new, shortened & then never fired. It's been swapped around lowers & with different accessories a few times. The barrel is date coded 06/16. The bolt still has some of its original white paint from Colt.
Left side
Without handguards 1
Without handguards 2
Upper markings
Barrel Extension
Front Sight Base Right
Front Sight Base Left
Date code on barrel
Colt BCG 1
Colt BCG 2
BCG marking
Bolt Face
Bolt White Paint
--------------------------------------------------------------
RMW Xtreme 7.5" DI45 .45 ACP complete upper$600 $475
This is a used RMW Xtreme 7.5" DI45 .45 ACP complete upper. The muzzle is threaded M16x1LH & includes a flash hider.
I've put exactly 150 rounds of WWB through this upper on a DDLES GLF lower using GLOCK 21 mags w/ KRISS extensions loaded to 25 each.
3 mags were fired with an AAC Ti-Rant 45 & 3 mags were fired unsuppressed. There were zero issues at all.
This upper requires the use of a standard AR-15 buffer with all of its weights removed.
Extremely comfortable to shoot with a can installed. It will work with pretty much any .45 ACP configured lower using nearly any mags. It was designed to run on a lower using M3 "Grease gun" mags.
Includes the following:
1 RMW Xtreme 7.5" DI45 .45 ACP upper
1 YHM YHM-9630-DX 7.29" Diamond Series free-floating handguard (installed)
1 RMW Xtreme DI45 complete BCG (installed)
1 LMT charging handle (installed)
1 set Surefire rail ladders (installed)
1 spare RMW Xtreme DI45 complete bolt assy.
Additional Photo 1
Additional Photo 2
Additional Photo 3
Additional Photo 4
Additional Photo 5
Additional Photo 6
Additional Photo 7
Additional Photo 8
Additional Photo 9
Additional Photo 10
--------------------------------------------------------------
Optics:
--------------------------------------------------------------
Holosun HE509T-RD X2 red dot sight SOLD to Lemonc
--------------------------------------------------------------
#812 Holosun HE530C-RD red dot sight$425 $250 SOLD to Outdoorslife1
--------------------------------------------------------------
#141 Holosun HE530C-RD red dot sight$425 SOLD
--------------------------------------------------------------
Barrels:
Tactical Solutions SBX barrels:
These are Tactical Solutions SBX barrels for the Ruger 10/22 Takedown. The purpose of this barrel is to allow the use of a suppressor whilst minimally increasing the overall length. It accomplishes this because it features a “cage” that is permanently attached to the muzzle, keeping the barrel length at just over 16” whether your suppressor is installed or not. It includes a black anodized fake suppressor. I have 3 of these barrels available. They’ve been installed, but I’ve never put any rounds through them. I’m only selling as I’ve decided to just register my rifles as SBRs.
Black Tactical Solutions SBX barrel SOLD to Doug_262
--------------------------------------------------------------
Red Tactical Solutions SBX barrel $150
Additional Photo 1
Additional Photo 2
Additional Photo 3
Additional Photo 4
--------------------------------------------------------------
Silver Tactical Solutions SBX barrel $150
Additional Photo 1
Additional Photo 2
Additional Photo 3
Additional Photo 4
--------------------------------------------------------------
Mossberg 590/500 14” barrel kit:$400 $325 each
2 available
These are complete, brand new Mossberg 500/590 14" barrel kits. Each kit includes 1 14" Mossberg 590 barrel, 1 5-round mag tube, 1 "short" action slide tube assy., 1 "short" forearm with strap, 1 mag tube spring, 1 follower & 1 mag tube cap. This is the complete front end of the firearm.
These kits can only be legally installed on PGO (pistol-grip only) "firearms" (500/590 shotguns that were shipped with only a pistol grip installed & no stock) when a Shockwave style grip of sufficient length is installed or as a replacement to the factory 14" Mossberg Shockwave line of firearms or on either a registered AOW (Any Other Weapon) or registered SBS (Short-Barrelled Shotgun). It is a violation of Federal law to even possess both this barrel kit & an unregistered, stock-equipped Mossberg 500/590. Non-NFA configuration requires an OAL of >26", but the barrel can be any length if installed on a PGO or Shockwave "firearm".
These kits are also compatible with the Maverick 88 line of firearms. I will only ship where legal. I have 2 of these barrel kits available. The parts shown were removed from the packaging for the first time for photos. Will ship in original box with factory label either covered or removed.
Additional Photo 1
Additional Photo 2
Additional Photo 3
Additional Photo 4
Additional Photo 5
Additional Photo 6
Additional Photo 7
Additional Photo 8
--------------------------------------------------------------
Benelli M4 18.5" barrel: $475
This is an original Benelli 18.5" barrel taken from an unfired Benelli M1014. It has some wear from the set screws of a Strike Ind. HAYL Rail M-LOK Handguard.
Additional Photo 1
Additional Photo 2
Additional Photo 3
Additional Photo 4
Additional Photo 5
--------------------------------------------------------------
Other:
LMT SOPMOD stock: $185
This is an LMT SOPMOD stock most commonly seen on the Mk18 mod 0. The plugs for the battery tube were trimmed to better accommodate items in storage.
Additional Photo 1
Additional Photo 2
Additional Photo 3
--------------------------------------------------------------
KAC RAS Bottom Rail: $100
This is a bottom rail for the KAC RAS. It's in very good condition.
Additional Photo 1
--------------------------------------------------------------
Benelli M4 5rd magazine tube: $60
This is the original 5rd magazine tube & "false" magazine extension from a new Benelli M4. Includes original spring seal ring.
Additional Photo
--------------------------------------------------------------
Strike Ind. HAYL Rail M-LOK Handguard for Benelli M4: $50
This handguard has a Magpul MFG & Surefire Scout light installed previously. Includes original box & set screws (allen wrench is missing).
Additional Photo 1
Additional Photo 2
Additional Photo 3
--------------------------------------------------------------
Benelli M4 fixed stock receiver extension: $25
Take off from a new Benelli M1014. This receiver extension is the civilian fixed stock version. The internals are NOT included.
Additional Photo
--------------------------------------------------------------
Thank you for looking!
~R.E.D.
(PLEASE be sure to check out my Russian & Bulgarian AK mag thread.)
7/30/25 UPDATE: Colt 10.3" CQBR complete upper, LMT L8A, SOPMOD stock & KAC RAS bottom rail added.
7/5/2025 UPDATE: V-Seven PDW upper added.
5/9/2025 UPDATE: Benelli parts added.
Today I’m listing a number of odds & ends that I have. Several optics, barrels, barrel kits & anything else I have that needs to go. I’ll be adding various AR parts over the next few weeks.
First, “I’ll take [item name]!” reply or PM wins.
I can only accept Ca$hApp & Zelle.
Shipping will be actual USPS Priority Mail rates. Estimates available on request.
I will print out & include a receipt for records & insurance purposes.
If you have any questions, just shoot me a PM! If you need a better picture of something, just let me know.
--------------------------------------------------------------
Uppers:
--------------------------------------------------------------
V-Seven 7.5" 5.56mm complete upper: $1,050
This is a V-Seven 7.5" 5.56mm complete upper. It includes a V7 7075 Enlightened receiver, V7 Ti port door & rod, V7 2099 Ultra-light M-lok 9.2" forend w/ Ti screws, V7 SS 7.5" match 5.56mm bbl, V7 Ti Helios linear comp, V7 NiB BCG & Radian Raptor charging handle in black. I have put 4 30rd mags through it just to function test it. Runs like a top!
Additional Photo 1
Additional Photo 2
Additional Photo 3
Additional Photo 4
Additional Photo 5
--------------------------------------------------------------
Colt 10.3" CQBR complete upper: $950
This is a Colt factory M4LE (6921LE) 14.5" bbl'd upper that had its bbl shortened to 10.3" by Specialized Armament Warehouse. They also opened the gas port to 0.071". This is a "keyhole" C-marked, Cerro forge upper & the bolt is C-marked via engraving. It has the original M4 double-shielded handguards, standard charging handle & A2 flash hider. This upper was purchased new, shortened & then never fired. It's been swapped around lowers & with different accessories a few times. The barrel is date coded 06/16. The bolt still has some of its original white paint from Colt.
Left side
Without handguards 1
Without handguards 2
Upper markings
Barrel Extension
Front Sight Base Right
Front Sight Base Left
Date code on barrel
Colt BCG 1
Colt BCG 2
BCG marking
Bolt Face
Bolt White Paint
--------------------------------------------------------------
RMW Xtreme 7.5" DI45 .45 ACP complete upper
This is a used RMW Xtreme 7.5" DI45 .45 ACP complete upper. The muzzle is threaded M16x1LH & includes a flash hider.
I've put exactly 150 rounds of WWB through this upper on a DDLES GLF lower using GLOCK 21 mags w/ KRISS extensions loaded to 25 each.
3 mags were fired with an AAC Ti-Rant 45 & 3 mags were fired unsuppressed. There were zero issues at all.
This upper requires the use of a standard AR-15 buffer with all of its weights removed.
Extremely comfortable to shoot with a can installed. It will work with pretty much any .45 ACP configured lower using nearly any mags. It was designed to run on a lower using M3 "Grease gun" mags.
Includes the following:
1 RMW Xtreme 7.5" DI45 .45 ACP upper
1 YHM YHM-9630-DX 7.29" Diamond Series free-floating handguard (installed)
1 RMW Xtreme DI45 complete BCG (installed)
1 LMT charging handle (installed)
1 set Surefire rail ladders (installed)
1 spare RMW Xtreme DI45 complete bolt assy.
Additional Photo 1
Additional Photo 2
Additional Photo 3
Additional Photo 4
Additional Photo 5
Additional Photo 6
Additional Photo 7
Additional Photo 8
Additional Photo 9
Additional Photo 10
--------------------------------------------------------------
Optics:
--------------------------------------------------------------
Holosun HE509T-RD X2 red dot sight SOLD to Lemonc
--------------------------------------------------------------
#812 Holosun HE530C-RD red dot sight
--------------------------------------------------------------
#141 Holosun HE530C-RD red dot sight
--------------------------------------------------------------
Barrels:
Tactical Solutions SBX barrels:
These are Tactical Solutions SBX barrels for the Ruger 10/22 Takedown. The purpose of this barrel is to allow the use of a suppressor whilst minimally increasing the overall length. It accomplishes this because it features a “cage” that is permanently attached to the muzzle, keeping the barrel length at just over 16” whether your suppressor is installed or not. It includes a black anodized fake suppressor. I have 3 of these barrels available. They’ve been installed, but I’ve never put any rounds through them. I’m only selling as I’ve decided to just register my rifles as SBRs.
Black Tactical Solutions SBX barrel SOLD to Doug_262
--------------------------------------------------------------
Red Tactical Solutions SBX barrel $150
Additional Photo 1
Additional Photo 2
Additional Photo 3
Additional Photo 4
--------------------------------------------------------------
Silver Tactical Solutions SBX barrel $150
Additional Photo 1
Additional Photo 2
Additional Photo 3
Additional Photo 4
--------------------------------------------------------------
Mossberg 590/500 14” barrel kit:
2 available
These are complete, brand new Mossberg 500/590 14" barrel kits. Each kit includes 1 14" Mossberg 590 barrel, 1 5-round mag tube, 1 "short" action slide tube assy., 1 "short" forearm with strap, 1 mag tube spring, 1 follower & 1 mag tube cap. This is the complete front end of the firearm.
These kits can only be legally installed on PGO (pistol-grip only) "firearms" (500/590 shotguns that were shipped with only a pistol grip installed & no stock) when a Shockwave style grip of sufficient length is installed or as a replacement to the factory 14" Mossberg Shockwave line of firearms or on either a registered AOW (Any Other Weapon) or registered SBS (Short-Barrelled Shotgun). It is a violation of Federal law to even possess both this barrel kit & an unregistered, stock-equipped Mossberg 500/590. Non-NFA configuration requires an OAL of >26", but the barrel can be any length if installed on a PGO or Shockwave "firearm".
These kits are also compatible with the Maverick 88 line of firearms. I will only ship where legal. I have 2 of these barrel kits available. The parts shown were removed from the packaging for the first time for photos. Will ship in original box with factory label either covered or removed.
Additional Photo 1
Additional Photo 2
Additional Photo 3
Additional Photo 4
Additional Photo 5
Additional Photo 6
Additional Photo 7
Additional Photo 8
--------------------------------------------------------------
Benelli M4 18.5" barrel: $475
This is an original Benelli 18.5" barrel taken from an unfired Benelli M1014. It has some wear from the set screws of a Strike Ind. HAYL Rail M-LOK Handguard.
Additional Photo 1
Additional Photo 2
Additional Photo 3
Additional Photo 4
Additional Photo 5
--------------------------------------------------------------
Other:
LMT SOPMOD stock: $185
This is an LMT SOPMOD stock most commonly seen on the Mk18 mod 0. The plugs for the battery tube were trimmed to better accommodate items in storage.
Additional Photo 1
Additional Photo 2
Additional Photo 3
--------------------------------------------------------------
KAC RAS Bottom Rail: $100
This is a bottom rail for the KAC RAS. It's in very good condition.
Additional Photo 1
--------------------------------------------------------------
Benelli M4 5rd magazine tube: $60
This is the original 5rd magazine tube & "false" magazine extension from a new Benelli M4. Includes original spring seal ring.
Additional Photo
--------------------------------------------------------------
Strike Ind. HAYL Rail M-LOK Handguard for Benelli M4: $50
This handguard has a Magpul MFG & Surefire Scout light installed previously. Includes original box & set screws (allen wrench is missing).
Additional Photo 1
Additional Photo 2
Additional Photo 3
--------------------------------------------------------------
Benelli M4 fixed stock receiver extension: $25
Take off from a new Benelli M1014. This receiver extension is the civilian fixed stock version. The internals are NOT included.
Additional Photo
--------------------------------------------------------------
Thank you for looking!
~R.E.D.
