Hello, all!
(be sure to check out my Russian & Bulgarian mag & ammo thread)
First, “I’ll take [number/letter]!” reply or PM wins.
I can accept Ca$hApp & Zelle. I cannot accept any other form of payment now. Absolutely NO sales to states with magazine capacity restrictions.
I will print out & include a receipt for records & insurance purposes.
If you have any questions, just shoot me a PM! If you need a better picture of something, just let me know.
--------------------------------------------------------------
Krebs Custom Krinkov 3-rail: $100
This KCI forend was purchased in 2006 directly from Krebs. It’s been installed on various Krink rifles & pistols. It has been used during live fire. Unfortunately, only a few years ago, when removing the forend from a rifle, the forwardmost tab of the 6 o’clock rail broke off. Because I always mounted my vertical grips around the middle of the forend, I didn’t worry about it. I used to run Surefire ladder-style pic-rail covers on all of the unused slots anyway. It did come with 4 different adapters so that the rail would fit most receivers. I used 1 of them to help hold the rail up for pictures (that’s not the broken tab).
Top side
Left side
Right side
Bottom rear side
--------------------------------------------------------------
Russian Izzy AK9 lower handguard: $225
This is a Russian AK9 lower handguard made by Izhmash. This lower handguard features a heat shield. It was previously installed on an Izzy SGL-3161 receiver-based AK-105 clone. It is perfect for people who prefer the look of the standard handguard but want to run a vertical grip & a light. Will fit all standard AK-pattern rifles.
Left side
Bottom side
Top side
--------------------------------------------------------------
Tapco SAW grips for AK: $30 each
These grips are the older type of SAW grip from Tapco for the AK. They feature a second hole through the top of the grip that I opened a little more to allow a complete AK bolt to be stored in the grips’ compartments. The left & middle grips can accept a 7.62 “large stem” bolt & the right grip was only opened enough to accept an AK-74 “small stem” bolt. Purchased back in 2006 & have been used. I used to wrap a shortened Hoppe’s Boresnake around my spare bolts & keep them in these grips. 3 available.
Right side
Bottom side 1
Bottom side 2
Bottom side 3
Bottom side 4
Top side
--------------------------------------------------------------
Tapco SAW grips for AK: $25 each
These are the later style SAW grips from Tapco for the AK. They do feel a little different than the older versions. I have 4 but 1 of them seems to be missing the screw, so I’ll take $5 off for that. If I come across the screw I’ll include it for free.
Right side
Top side
Bottom side
--------------------------------------------------------------
Bulgarian AKS-74U triangle stock: $200 SOLD to Jammasterjay
This is an original Bulgarian AKS-74U 4.5mm “triangle” left-side folding stocks. It features a ribbed buttplate & rounded/rolled edge. It appears to have its original finish. I wrapped it in 3M electrical tape & then wrapped it with Goldberg green 750 paracord.
Left side
Rear left side
Front right side
--------------------------------------------------------------
Griffin Armament 24x1.5mm to 5/8x24 adapter:$60 (no longer available)
Griffin Armament 24x1.5mm to 1/2x28 adapter: $60
These adapters by Griffin Armament allow the installation of common muzzle devices on AK-100 & AKS-74U pattern rifles with 24x1.5mm RH threaded FSB/GBs. I have only ever installed them hand-tight on my rifles. No round count through either.
Muzzle ends
Rear ends
--------------------------------------------------------------
CNC Warrior 24x1.5mm to 1/2x28 adapter: $20
Similar to the above by CNC Warrior. This adapter does have notches for the detent of the FSB/GB. Never used.
--------------------------------------------------------------
Russian AKS-74U sling: $30
Original Russian tan sling for the AKS-74U. I can’t make out any ink stamps on it. I have no idea if it was ever issued, but it is in great shape. I have never installed it on a rifle.
Other side
--------------------------------------------------------------
Bulgarian trigger & hammer for milled AKs: $20
Original Bulgarian trigger & hammer for milled rifles. Purchased years ago for an SAS M-7.
Other sides
--------------------------------------------------------------
AKM cleaning rod: $25
AK-74 cleaning rod: $25
I’m now unsure if both of these cleaning rods are Bulgarian or Russian. I haven’t needed them as my only rifles have been Krinks & 104/105 clones. Great condition & certainly necessary for that classic “look” when installed.
Close-up of threads
--------------------------------------------------------------
Thank you for looking!
~R.E.D.
(be sure to check out my Russian & Bulgarian mag & ammo thread)
First, “I’ll take [number/letter]!” reply or PM wins.
I can accept Ca$hApp & Zelle. I cannot accept any other form of payment now. Absolutely NO sales to states with magazine capacity restrictions.
I will print out & include a receipt for records & insurance purposes.
If you have any questions, just shoot me a PM! If you need a better picture of something, just let me know.
--------------------------------------------------------------
Krebs Custom Krinkov 3-rail: $100
This KCI forend was purchased in 2006 directly from Krebs. It’s been installed on various Krink rifles & pistols. It has been used during live fire. Unfortunately, only a few years ago, when removing the forend from a rifle, the forwardmost tab of the 6 o’clock rail broke off. Because I always mounted my vertical grips around the middle of the forend, I didn’t worry about it. I used to run Surefire ladder-style pic-rail covers on all of the unused slots anyway. It did come with 4 different adapters so that the rail would fit most receivers. I used 1 of them to help hold the rail up for pictures (that’s not the broken tab).
Top side
Left side
Right side
Bottom rear side
--------------------------------------------------------------
Russian Izzy AK9 lower handguard: $225
This is a Russian AK9 lower handguard made by Izhmash. This lower handguard features a heat shield. It was previously installed on an Izzy SGL-3161 receiver-based AK-105 clone. It is perfect for people who prefer the look of the standard handguard but want to run a vertical grip & a light. Will fit all standard AK-pattern rifles.
Left side
Bottom side
Top side
--------------------------------------------------------------
Tapco SAW grips for AK: $30 each
These grips are the older type of SAW grip from Tapco for the AK. They feature a second hole through the top of the grip that I opened a little more to allow a complete AK bolt to be stored in the grips’ compartments. The left & middle grips can accept a 7.62 “large stem” bolt & the right grip was only opened enough to accept an AK-74 “small stem” bolt. Purchased back in 2006 & have been used. I used to wrap a shortened Hoppe’s Boresnake around my spare bolts & keep them in these grips. 3 available.
Right side
Bottom side 1
Bottom side 2
Bottom side 3
Bottom side 4
Top side
--------------------------------------------------------------
Tapco SAW grips for AK: $25 each
These are the later style SAW grips from Tapco for the AK. They do feel a little different than the older versions. I have 4 but 1 of them seems to be missing the screw, so I’ll take $5 off for that. If I come across the screw I’ll include it for free.
Right side
Top side
Bottom side
--------------------------------------------------------------
Bulgarian AKS-74U triangle stock: $200 SOLD to Jammasterjay
This is an original Bulgarian AKS-74U 4.5mm “triangle” left-side folding stocks. It features a ribbed buttplate & rounded/rolled edge. It appears to have its original finish. I wrapped it in 3M electrical tape & then wrapped it with Goldberg green 750 paracord.
Left side
Rear left side
Front right side
--------------------------------------------------------------
Griffin Armament 24x1.5mm to 5/8x24 adapter:
Griffin Armament 24x1.5mm to 1/2x28 adapter: $60
These adapters by Griffin Armament allow the installation of common muzzle devices on AK-100 & AKS-74U pattern rifles with 24x1.5mm RH threaded FSB/GBs. I have only ever installed them hand-tight on my rifles. No round count through either.
Muzzle ends
Rear ends
--------------------------------------------------------------
CNC Warrior 24x1.5mm to 1/2x28 adapter: $20
Similar to the above by CNC Warrior. This adapter does have notches for the detent of the FSB/GB. Never used.
--------------------------------------------------------------
Russian AKS-74U sling: $30
Original Russian tan sling for the AKS-74U. I can’t make out any ink stamps on it. I have no idea if it was ever issued, but it is in great shape. I have never installed it on a rifle.
Other side
--------------------------------------------------------------
Bulgarian trigger & hammer for milled AKs: $20
Original Bulgarian trigger & hammer for milled rifles. Purchased years ago for an SAS M-7.
Other sides
--------------------------------------------------------------
AKM cleaning rod: $25
AK-74 cleaning rod: $25
I’m now unsure if both of these cleaning rods are Bulgarian or Russian. I haven’t needed them as my only rifles have been Krinks & 104/105 clones. Great condition & certainly necessary for that classic “look” when installed.
Close-up of threads
--------------------------------------------------------------
Thank you for looking!
~R.E.D.
