Hello, all!
(be sure to check out my AK-105, SLR-107CR, SLR-107UR SBRs & 11" Saiga 12 thread & my AR uppers, Mossberg & Benelli barrel & parts thread)
Today, I’m updating this thread with several items I previously set aside.
Shipping will be actual USPS rates with insurance. Shipping estimates available on request.
Hotlinks to additional images will be posted below each main image to keep the thread tidy.
First, “I’ll take [item name & number]!” reply or PM wins.
I can accept Ca$hApp & Zelle. I cannot accept any other form of payment now.
I will print out & include a receipt for records & insurance purposes.
If you have any questions, just shoot me a PM! If you need a better picture of something, just let me know.
--------------------------------------------------------------
Forends, grips & stocks:
Krebs Custom Krinkov 3-rail: $100
This KCI forend was purchased in 2006 directly from Krebs. It’s been installed on various Krink rifles & pistols. It has been used during live fire. Unfortunately, only a few years ago, when removing the forend from a rifle, the forwardmost tab of the 6 o’clock rail broke off. Because I always mounted my vertical grips around the middle of the forend, I didn’t worry about it. I used to run Surefire ladder-style pic-rail covers on all of the unused slots anyway. It did come with 4 different adapters so that the rail would fit most receivers. I used 1 of them to help hold the rail up for pictures (that’s not the broken tab).
Top side
Left side
Right side
Bottom rear side
Installed on 107UR 1
Installed on 107UR 2
Installed on 107UR 3
--------------------------------------------------------------
Custom Bulgarian gas tube: $100
This is a Bulgarian AKS-74U gas tube in which I installed an SKS “cheese grater” heat shield in. I had it welded in place by the SOT who did the work on my AK SBRs (Sierra Ordnance Co.) & Cerakoted in graphite black. It pairs very well with the KCI 3 rail handguard above. It was installed on various rifles & has been used during live fire.
Left side
Top side
Bottom side
--------------------------------------------------------------
KPYK AKM Coyote Tan handguard set: $115
This is a Ukrainian KPYK handguard for AKM/AK-100-based rifles. It features M-LOK slots with a pic-rail on top. It’s Cerakoted in Coyote Tan H-235. It was previously installed on a Bulgy 107CR & touched up with a Sharpie but has never seen live fire. Includes T20 tool.
Left side
Top side
Bottom side
Rear side
Front side
--------------------------------------------------------------
KPYK AKM OD Green handguard set: $115
Same as above, but in OD green. It was previously installed on a Russian AK-105 clone & touched up with a Sharpie but has never seen live fire. Includes T20 tool.
Left side
Top side
Bottom side
Rear side
Front side
--------------------------------------------------------------
KPYK AKSU Coyote Tan handguard set: $115
This is a Ukrainian KPYK handguard for AKS-74U-based rifles. It features M-LOK slots with a pic-rail on top. It’s Cerakoted in Coyote Tan H-235. It was fitted to & previously installed on a Bulgy 107UR. This required substantial filing as these forends do NOT fit 7.62 rifles by default. It was touched up with a Sharpie. It has never seen live fire. Includes T20 tool.
Left side
Top side
Bottom side
Rear side
Front side
--------------------------------------------------------------
KPYK AKSU OD Green handguard set: $110
Same as above, but in OD Green. It was previously installed on a Bulgarian AKS-74U clone & touched up with a Sharpie but has never seen live fire. Includes T20 tool.
NOTE: For some reason, this forend only included 3 T-20 screws. The price reflects this.
Left side
Top side
Bottom side
Rear side
Front side
--------------------------------------------------------------
Meridian Defense Corp. / Hogue grips for AK: $25 each
These are like-new grips by Hogue & MDC. They feature a storage compartment & Hogue overmolded rubber texture. Black, OD green & FDE available.
Left side
MDC logo
--------------------------------------------------------------
Magpul MOE AK grips in black or FDE: $20 each
These are like new grips (all purchased this year) for the AK by Magpul. I have 1 FDE & 2 black grips. Includes screw & compartment cover.
--------------------------------------------------------------
Tapco SAW grips for AK: $25 each
These grips are the older type of SAW grip from Tapco for the AK. They feature a second hole through the top of the grip that I opened a little more to allow a complete AK bolt to be stored in the grips’ compartments. The left & middle grips can accept a 7.62 “large stem” bolt & the right grip was only opened enough to accept an AK-74 “small stem” bolt. Purchased back in 2006 & have been used. I used to wrap a shortened Hoppe’s Boresnake around my spare bolts & keep them in these grips. 3 available.
Right side
Bottom side 1
Bottom side 2
Bottom side 3
Bottom side 4
Top side
--------------------------------------------------------------
Tapco SAW grips for AK: $20 each
These are the later style SAW grips from Tapco for the AK. They do feel a little different than the older versions. I have 4 but 1 of them seems to be missing the screw, so I’ll take $5 off for that. If I come across the screw I’ll include it for free.
Right side
Top side
Bottom side
--------------------------------------------------------------
Bulgarian AKS-74U triangle stock 2: $200
This is an original Bulgarian AKS-74U 4.5mm “triangle” left-side folding stock. It features a ribbed buttplate & rounded/rolled edge. It appears to have its original finish. I wrapped it in 3M electrical tape & then wrapped it with Goldberg 750 paracord. I can include a Bulgarian 4.5mm pin for $15.
Left side
Rear left side
Front right side
--------------------------------------------------------------
Arsenal Inc. US-made poly side folder: $50
This is an Arsenal Inc. US-made stock for 4.5mm rear folding blocks. This particular stock was fitted to a rifle that had a rather thick latch. Wanting the latch to continue to function with its factory stock, I decided to remove material from the stock so it would fit.
NOTE: I have found that there is considerable wobble with every other latch I've tried. If you purchase this stock, expect to have to fill the hole on the right with something & then fit it to your rifle. It is priced accordingly.
Left side
Close-up
--------------------------------------------------------------
Bulgarian 106U rear block plate: $40
This is the plate that covers the rear block of the 5.56mm 106U pistol. It was purchased & modified to allow me to run single-point slings with no stock but is much more removable than it was originally. I filed the plate down so that it would fit either the 4.5mm or 5.5mm rear block. I removed the hook from a rear block latch so that the hole through the receiver has something to fill it. The plate was touched up with an "Industrial" Sharpie & the latch was touched up with cold blue.
Back side
--------------------------------------------------------------
Muzzle devices:
Griffin Armament 24x1.5mm to 5/8x24 adapter: $60
Griffin Armament 24x1.5mm to 1/2x28 adapter: $60
These adapters by Griffin Armament allow the installation of common muzzle devices on AK-100 & AKS-74U pattern rifles with 24x1.5mm RH threaded FSB/GBs. I have only ever installed them hand-tight on my rifles. No round count through either.
Muzzle ends
Rear ends
--------------------------------------------------------------
Fire Control Group:
Bulgarian trigger & hammer for milled AKs: $20
Original Bulgarian trigger & hammer for milled rifles. Purchased years ago for an SAS M-7.
Other sides
--------------------------------------------------------------
Meridian Defense Corp. FCG: $125
This is a fire control group by Meridian Defense for the AK platform. This unit is brand new & never fitted to a rifle. Includes trigger, disconnector, disconnector spring, hammer, hammer spring & trigger pin retaining plate.
Other side
--------------------------------------------------------------
Arsenal Inc. US-made FCG: $75
This is a US-made fire control group by Arsenal Inc. for the AK platform. Includes trigger, disconnector, disconnector spring, hammer & hammer spring.
Other side
--------------------------------------------------------------
Tula Russian FCG: $75
This is a Russian-made fire control group by Tula for the AK platform. It was removed from a 1986 Russian Tula AKS-74U kit. Includes trigger, disconnector, disconnector spring, sleeve & hammer. The hammer & disconnector were modified to function in semi-auto only.
Other side
--------------------------------------------------------------
Arsenal Inc. US-made & Arsenal Co. Bulgarian FCG: $65
This FCG includes a US-made trigger & disconnector, but includes a Bulgarian Arsenal Co. hammer. This FCG was taken from a post-ban SLR-105 that only needed the trigger & hammer (in addition to furniture) to be 922(r) compliant.
Other side
--------------------------------------------------------------
Arsenal Co. Bulgarian hammer retarder: $25
This is an original Arsenal Co. Bulgarian made hammer retarder. It is intended for use in full-auto weapons & will not fit any US-made trigger.
Other side
--------------------------------------------------------------
Other parts:
Norinco SKS paratrooper spike bayonet: $50
Original Chinese Norinco SKS spike bayonet cut-down to fit a 16" paratrooper rifle. The tip was then sharpened on a grinder.
Other side
Tip
--------------------------------------------------------------
Arsenal Inc. US-made mag floor plates: $20
This is 5 US-made Arsenal Inc. magazine floor plates. They were made as replacements to the original Bulgarian magazines in 7.62, 5.56 & 5.45. May fit other manufacturers.
Other side
US engraving
--------------------------------------------------------------
Russian AKS-74U sling: $30
Original Russian tan sling for the AKS-74U. I can’t make out any ink stamps on it. I have no idea if it was ever issued, but it is in great shape. I have never installed it on a rifle.
Other side
--------------------------------------------------------------
AKM cleaning rod: $25
AK-74 cleaning rod: $25
I’m now unsure if both of these cleaning rods are Bulgarian or Russian. I haven’t needed them as my only rifles have been Krinks & 104/105 clones. Great condition & certainly necessary for that classic “look” when installed.
Close-up of threads
Close-up of front 1
Close-up of front 2
--------------------------------------------------------------
Mags:
Current AK-103M mags:
These are current production Russian AK-103M/AK-203 30rd mags made by Izhmash. These mags appear to be unissued and are in excellent condition.
NOTE: 1A is mold number "6", 1B, 1C, 1D & 1E are all mold number "18".
Group 1:$125 $110 each
1B: SOLD to Midasknight
1C: SOLD
Group 1, Right
Group 1, back
Group 1, front
Group 1, feedlips
Group 1, floorplates
--------------------------------------------------------------
SOLD:
Bulgarian AKS-74U triangle stock: $200 SOLD to Jammasterjay
--------------------------------------------------------------
Thank you for looking!
~R.E.D.
(be sure to check out my AK-105, SLR-107CR, SLR-107UR SBRs & 11" Saiga 12 thread & my AR uppers, Mossberg & Benelli barrel & parts thread)
Today, I’m updating this thread with several items I previously set aside.
Shipping will be actual USPS rates with insurance. Shipping estimates available on request.
Hotlinks to additional images will be posted below each main image to keep the thread tidy.
First, “I’ll take [item name & number]!” reply or PM wins.
I can accept Ca$hApp & Zelle. I cannot accept any other form of payment now.
I will print out & include a receipt for records & insurance purposes.
If you have any questions, just shoot me a PM! If you need a better picture of something, just let me know.
--------------------------------------------------------------
Forends, grips & stocks:
Krebs Custom Krinkov 3-rail: $100
This KCI forend was purchased in 2006 directly from Krebs. It’s been installed on various Krink rifles & pistols. It has been used during live fire. Unfortunately, only a few years ago, when removing the forend from a rifle, the forwardmost tab of the 6 o’clock rail broke off. Because I always mounted my vertical grips around the middle of the forend, I didn’t worry about it. I used to run Surefire ladder-style pic-rail covers on all of the unused slots anyway. It did come with 4 different adapters so that the rail would fit most receivers. I used 1 of them to help hold the rail up for pictures (that’s not the broken tab).
Top side
Left side
Right side
Bottom rear side
Installed on 107UR 1
Installed on 107UR 2
Installed on 107UR 3
--------------------------------------------------------------
Custom Bulgarian gas tube: $100
This is a Bulgarian AKS-74U gas tube in which I installed an SKS “cheese grater” heat shield in. I had it welded in place by the SOT who did the work on my AK SBRs (Sierra Ordnance Co.) & Cerakoted in graphite black. It pairs very well with the KCI 3 rail handguard above. It was installed on various rifles & has been used during live fire.
Left side
Top side
Bottom side
--------------------------------------------------------------
KPYK AKM Coyote Tan handguard set: $115
This is a Ukrainian KPYK handguard for AKM/AK-100-based rifles. It features M-LOK slots with a pic-rail on top. It’s Cerakoted in Coyote Tan H-235. It was previously installed on a Bulgy 107CR & touched up with a Sharpie but has never seen live fire. Includes T20 tool.
Left side
Top side
Bottom side
Rear side
Front side
--------------------------------------------------------------
KPYK AKM OD Green handguard set: $115
Same as above, but in OD green. It was previously installed on a Russian AK-105 clone & touched up with a Sharpie but has never seen live fire. Includes T20 tool.
Left side
Top side
Bottom side
Rear side
Front side
--------------------------------------------------------------
KPYK AKSU Coyote Tan handguard set: $115
This is a Ukrainian KPYK handguard for AKS-74U-based rifles. It features M-LOK slots with a pic-rail on top. It’s Cerakoted in Coyote Tan H-235. It was fitted to & previously installed on a Bulgy 107UR. This required substantial filing as these forends do NOT fit 7.62 rifles by default. It was touched up with a Sharpie. It has never seen live fire. Includes T20 tool.
Left side
Top side
Bottom side
Rear side
Front side
--------------------------------------------------------------
KPYK AKSU OD Green handguard set: $110
Same as above, but in OD Green. It was previously installed on a Bulgarian AKS-74U clone & touched up with a Sharpie but has never seen live fire. Includes T20 tool.
NOTE: For some reason, this forend only included 3 T-20 screws. The price reflects this.
Left side
Top side
Bottom side
Rear side
Front side
--------------------------------------------------------------
Meridian Defense Corp. / Hogue grips for AK: $25 each
These are like-new grips by Hogue & MDC. They feature a storage compartment & Hogue overmolded rubber texture. Black, OD green & FDE available.
Left side
MDC logo
--------------------------------------------------------------
Magpul MOE AK grips in black or FDE: $20 each
These are like new grips (all purchased this year) for the AK by Magpul. I have 1 FDE & 2 black grips. Includes screw & compartment cover.
--------------------------------------------------------------
Tapco SAW grips for AK: $25 each
These grips are the older type of SAW grip from Tapco for the AK. They feature a second hole through the top of the grip that I opened a little more to allow a complete AK bolt to be stored in the grips’ compartments. The left & middle grips can accept a 7.62 “large stem” bolt & the right grip was only opened enough to accept an AK-74 “small stem” bolt. Purchased back in 2006 & have been used. I used to wrap a shortened Hoppe’s Boresnake around my spare bolts & keep them in these grips. 3 available.
Right side
Bottom side 1
Bottom side 2
Bottom side 3
Bottom side 4
Top side
--------------------------------------------------------------
Tapco SAW grips for AK: $20 each
These are the later style SAW grips from Tapco for the AK. They do feel a little different than the older versions. I have 4 but 1 of them seems to be missing the screw, so I’ll take $5 off for that. If I come across the screw I’ll include it for free.
Right side
Top side
Bottom side
--------------------------------------------------------------
Bulgarian AKS-74U triangle stock 2: $200
This is an original Bulgarian AKS-74U 4.5mm “triangle” left-side folding stock. It features a ribbed buttplate & rounded/rolled edge. It appears to have its original finish. I wrapped it in 3M electrical tape & then wrapped it with Goldberg 750 paracord. I can include a Bulgarian 4.5mm pin for $15.
Left side
Rear left side
Front right side
--------------------------------------------------------------
Arsenal Inc. US-made poly side folder: $50
This is an Arsenal Inc. US-made stock for 4.5mm rear folding blocks. This particular stock was fitted to a rifle that had a rather thick latch. Wanting the latch to continue to function with its factory stock, I decided to remove material from the stock so it would fit.
NOTE: I have found that there is considerable wobble with every other latch I've tried. If you purchase this stock, expect to have to fill the hole on the right with something & then fit it to your rifle. It is priced accordingly.
Left side
Close-up
--------------------------------------------------------------
Bulgarian 106U rear block plate: $40
This is the plate that covers the rear block of the 5.56mm 106U pistol. It was purchased & modified to allow me to run single-point slings with no stock but is much more removable than it was originally. I filed the plate down so that it would fit either the 4.5mm or 5.5mm rear block. I removed the hook from a rear block latch so that the hole through the receiver has something to fill it. The plate was touched up with an "Industrial" Sharpie & the latch was touched up with cold blue.
Back side
--------------------------------------------------------------
Muzzle devices:
Griffin Armament 24x1.5mm to 5/8x24 adapter: $60
Griffin Armament 24x1.5mm to 1/2x28 adapter: $60
These adapters by Griffin Armament allow the installation of common muzzle devices on AK-100 & AKS-74U pattern rifles with 24x1.5mm RH threaded FSB/GBs. I have only ever installed them hand-tight on my rifles. No round count through either.
Muzzle ends
Rear ends
--------------------------------------------------------------
Fire Control Group:
Bulgarian trigger & hammer for milled AKs: $20
Original Bulgarian trigger & hammer for milled rifles. Purchased years ago for an SAS M-7.
Other sides
--------------------------------------------------------------
Meridian Defense Corp. FCG: $125
This is a fire control group by Meridian Defense for the AK platform. This unit is brand new & never fitted to a rifle. Includes trigger, disconnector, disconnector spring, hammer, hammer spring & trigger pin retaining plate.
Other side
--------------------------------------------------------------
Arsenal Inc. US-made FCG: $75
This is a US-made fire control group by Arsenal Inc. for the AK platform. Includes trigger, disconnector, disconnector spring, hammer & hammer spring.
Other side
--------------------------------------------------------------
Tula Russian FCG: $75
This is a Russian-made fire control group by Tula for the AK platform. It was removed from a 1986 Russian Tula AKS-74U kit. Includes trigger, disconnector, disconnector spring, sleeve & hammer. The hammer & disconnector were modified to function in semi-auto only.
Other side
--------------------------------------------------------------
Arsenal Inc. US-made & Arsenal Co. Bulgarian FCG: $65
This FCG includes a US-made trigger & disconnector, but includes a Bulgarian Arsenal Co. hammer. This FCG was taken from a post-ban SLR-105 that only needed the trigger & hammer (in addition to furniture) to be 922(r) compliant.
Other side
--------------------------------------------------------------
Arsenal Co. Bulgarian hammer retarder: $25
This is an original Arsenal Co. Bulgarian made hammer retarder. It is intended for use in full-auto weapons & will not fit any US-made trigger.
Other side
--------------------------------------------------------------
Other parts:
Norinco SKS paratrooper spike bayonet: $50
Original Chinese Norinco SKS spike bayonet cut-down to fit a 16" paratrooper rifle. The tip was then sharpened on a grinder.
Other side
Tip
--------------------------------------------------------------
Arsenal Inc. US-made mag floor plates: $20
This is 5 US-made Arsenal Inc. magazine floor plates. They were made as replacements to the original Bulgarian magazines in 7.62, 5.56 & 5.45. May fit other manufacturers.
Other side
US engraving
--------------------------------------------------------------
Russian AKS-74U sling: $30
Original Russian tan sling for the AKS-74U. I can’t make out any ink stamps on it. I have no idea if it was ever issued, but it is in great shape. I have never installed it on a rifle.
Other side
--------------------------------------------------------------
AKM cleaning rod: $25
AK-74 cleaning rod: $25
I’m now unsure if both of these cleaning rods are Bulgarian or Russian. I haven’t needed them as my only rifles have been Krinks & 104/105 clones. Great condition & certainly necessary for that classic “look” when installed.
Close-up of threads
Close-up of front 1
Close-up of front 2
--------------------------------------------------------------
Mags:
Current AK-103M mags:
These are current production Russian AK-103M/AK-203 30rd mags made by Izhmash. These mags appear to be unissued and are in excellent condition.
NOTE: 1A is mold number "6", 1B, 1C, 1D & 1E are all mold number "18".
Group 1:
1B: SOLD to Midasknight
1C: SOLD
Group 1, Right
Group 1, back
Group 1, front
Group 1, feedlips
Group 1, floorplates
--------------------------------------------------------------
SOLD:
Bulgarian AKS-74U triangle stock: $200 SOLD to Jammasterjay
--------------------------------------------------------------
Thank you for looking!
~R.E.D.
