Hello, all!
(be sure to check out my AK-105 SBR, SLR-107CR SBR & 11" Saiga-12 SBS thread)
6/9/2025 UPDATE: Burris 2-7x32mm handgun scope added.
6/8/2025 UPDATE: Agency Arms S2.5 complete upper & GGP complete slide added.
5/26/25 UPDATE: Final price drop!
5/16/25 UPDATE: Price drop!
5/9/2025 UPDATE: Benelli parts & Colt .22 LR conversion added.
Today I’m listing a number of odds & ends that I have. Several optics, barrels, barrel kits & anything else I have that needs to go. I’ll be adding various AR parts over the next few weeks.
Shipping will be actual USPS rates with insurance. Shipping estimates are available on request.
First, “I’ll take [item name]!” reply or PM wins.
I can only accept Ca$hApp & Zelle.
I will print out & include a receipt for records & insurance purposes.
If you have any questions, just shoot me a PM! If you need a better picture of something, just let me know.
--------------------------------------------------------------
Uppers:
--------------------------------------------------------------
Agency Arms Syndicate complete G19 upper: $850
This is an Agency Arms Syndicate S2.5 complete slide for the GLOCK 19 Gen 3 pistol. All of its internals are factory GLOCK parts, including the recoil spring & rear plate. It and the included barrel were purchased in 2022 & it was never fired. The sights are TruGlo TFX Pro, purchased at the same time.
NOTE: This listing includes the red soft case that the slide came in, but I don't know where the case for the barrel is, so it will ship installed in the slide & placed in the red case.
2nd NOTE: If you don't want the installed sights, I can remove them & take $75 off.
Additional Photo 1
Additional Photo 2
Additional Photo 3
Additional Photo 4
Additional Photo 5
Additional Photo 6
--------------------------------------------------------------
Grey Ghost Precision OC V4 complete slide: $400
This is a complete Grey Ghost Precision OC V4 slide. It was completed using all new factory GLOCK 19 parts. I installed a set of XS DXT2 Big Dot (yellow) sights that would clear any optic I installed. It was assembled onto a frame, but never fired.
NOTE: If you don't want the installed sights, I can remove them & take $75 off.
Additional Photo 1
Additional Photo 2
Additional Photo 3
Additional Photo 4
Additional Photo 5
--------------------------------------------------------------
Colt .22 LR AR-15 conversion unit: $150
This is an original Colt .22 LR conversion unit for the AR-15/M-16. It is used in very good condition. I have no idea what the round count is as this used to belong to my father. It does NOT feature an auto-sear engagement, so it is for semi-auto only.
Additional Photo 1
Additional Photo 2
--------------------------------------------------------------
RMW Xtreme 7.5" DI45 .45 ACP complete upper$600 $475
This is a used RMW Xtreme 7.5" DI45 .45 ACP complete upper. The muzzle is threaded M16x1LH & includes a flash hider.
I've put exactly 150 rounds of WWB through this upper on a DDLES GLF lower using GLOCK 21 mags w/ KRISS extensions loaded to 25 each.
3 mags were fired with an AAC Ti-Rant 45 & 3 mags were fired unsuppressed. There were zero issues at all.
This upper requires the use of a standard AR-15 buffer with all of its weights removed.
Extremely comfortable to shoot with a can installed. It will work with pretty much any .45 ACP configured lower using nearly any mags. It was designed to run on a lower using M3 "Grease gun" mags.
Includes the following:
1 RMW Xtreme 7.5" DI45 .45 ACP upper
1 YHM YHM-9630-DX 7.29" Diamond Series free-floating handguard (installed)
1 RMW Xtreme DI45 complete BCG (installed)
1 Colt charging handle (installed)
1 set Surefire rail ladders (installed)
1 spare RMW Xtreme DI45 complete bolt assy.
Additional Photo 1
Additional Photo 2
Additional Photo 3
Additional Photo 4
Additional Photo 5
Additional Photo 6
Additional Photo 7
Additional Photo 8
Additional Photo 9
Additional Photo 10
--------------------------------------------------------------
Optics:
--------------------------------------------------------------
Burris 2-7x32mm Handgun scope: $225
This is a Burris 2-7x32mm Handgun scope (# 200298). It features a 1" tube, nickel finish & Plex reticle. It was purchased for a Fletcher 11/22 with a rail section pretty far forward. I bought this scope thinking the generous eye relief would make it ideal. Turns out, it really is just for handgun use with arms extended. I mounted it using Leupold QRW2 rings. I followed the instructions for torque spec (25 in-lbs using a Fixit-Stick) & sequence, yet the rings still pinched the tube a bit on the right side (hence the reason for the price). If it weren't for the pinching on the right side, this scope would be like new as the rifle it was on remained in the safe & was never fired.
Additional Photo 1
Additional Photo 2
Additional Photo 3
Additional Photo 4
Additional Photo 5
Additional Photo 6
Additional Photo 7
Holosun HE530C-RD red dot sights: ALL SOLD
This is the Holosun HE530C-RD with a red reticle. It features a 30mm titanium housing (a T1 is ~20mm), 50k battery life (on setting 6 of 10 daylight, has 2 NV settings), 2 MOA dot & 65 MOA circle (circle & dot or dot selectable) & weighs 6.77oz. It uses a CR2032 battery (not included). These sights were purchased back in 2022 & installed on a few firearms but never used during live fire.
--------------------------------------------------------------
#141 Holosun HE530C-RD red dot sight SOLD to Wino Tier
--------------------------------------------------------------
Barrels:
Tactical Solutions SBX barrels:
These are Tactical Solutions SBX barrels for the Ruger 10/22 Takedown. The purpose of this barrel is to allow the use of a suppressor whilst minimally increasing the overall length. It accomplishes this because it features a “cage” that is permanently attached to the muzzle, keeping the barrel length at just over 16” whether your suppressor is installed or not. It includes a black anodized fake suppressor. I have 3 of these barrels available. They’ve been installed, but I’ve never put any rounds through them. I’m only selling as I’ve decided to just register my rifles as SBRs.
Black Tactical Solutions SBX barrel SOLD
--------------------------------------------------------------
Red Tactical Solutions SBX barrel $150
Additional Photo 1
Additional Photo 2
Additional Photo 3
Additional Photo 4
--------------------------------------------------------------
Silver Tactical Solutions SBX barrel $150
Additional Photo 1
Additional Photo 2
Additional Photo 3
Additional Photo 4
--------------------------------------------------------------
Mossberg 590/500 14” barrel kit:$400 $350 each
3 available
These are complete, brand new Mossberg 500/590 14" barrel kits. Each kit includes 1 14" Mossberg 590 barrel, 1 5-round mag tube, 1 "short" action slide tube assy., 1 "short" forearm with strap, 1 mag tube spring, 1 follower & 1 mag tube cap. This is the complete front end of the firearm.
These kits can only be legally installed on PGO (pistol-grip only) "firearms" (500/590 shotguns that were shipped with only a pistol grip installed & no stock) when a Shockwave style grip of sufficient length is installed or as a replacement to the factory 14" Mossberg Shockwave line of firearms or on either a registered AOW (Any Other Weapon) or registered SBS (Short-Barrelled Shotgun). It is a violation of Federal law to even possess both this barrel kit & an unregistered, stock-equipped Mossberg 500/590. Non-NFA configuration requires an OAL of >26", but the barrel can be any length if installed on a PGO or Shockwave "firearm".
These kits are also compatible with the Maverick 88 line of firearms. I will only ship where legal. I have 2 of these barrel kits available. The parts shown were removed from the packaging for the first time for photos. Will ship in original box with factory label either covered or removed.
Additional Photo 1
Additional Photo 2
Additional Photo 3
Additional Photo 4
Additional Photo 5
Additional Photo 6
Additional Photo 7
Additional Photo 8
--------------------------------------------------------------
Benelli M4 18.5" barrel: $525
This is an original Benelli 18.5" barrel taken from an unfired Benelli M1014. It has some wear from the set screws of a Strike Ind. HAYL Rail M-LOK Handguard.
Additional Photo 1
Additional Photo 2
Additional Photo 3
Additional Photo 4
Additional Photo 5
--------------------------------------------------------------
Benelli M4 5rd magazine tube: $60
This is the original 5rd magazine tube & "false" magazine extension from a new Benelli M4. Includes original spring seal ring.
Additional Photo
--------------------------------------------------------------
Strike Ind. HAYL Rail M-LOK Handguard for Benelli M4: $60
This handguard has a Magpul MFG & Surefire Scout light installed previously. Includes original box & set screws (allen wrench is missing).
Additional Photo 1
Additional Photo 2
Additional Photo 3
--------------------------------------------------------------
Benelli M4 fixed stock receiver extension: $25
Take off from a new Benelli M1014. This receiver extension is the civilian fixed stock version. The internals are NOT included.
Additional Photo
--------------------------------------------------------------
Thank you for looking!
~R.E.D.
(be sure to check out my AK-105 SBR, SLR-107CR SBR & 11" Saiga-12 SBS thread)
6/9/2025 UPDATE: Burris 2-7x32mm handgun scope added.
6/8/2025 UPDATE: Agency Arms S2.5 complete upper & GGP complete slide added.
5/26/25 UPDATE: Final price drop!
5/16/25 UPDATE: Price drop!
5/9/2025 UPDATE: Benelli parts & Colt .22 LR conversion added.
Today I’m listing a number of odds & ends that I have. Several optics, barrels, barrel kits & anything else I have that needs to go. I’ll be adding various AR parts over the next few weeks.
Shipping will be actual USPS rates with insurance. Shipping estimates are available on request.
First, “I’ll take [item name]!” reply or PM wins.
I can only accept Ca$hApp & Zelle.
I will print out & include a receipt for records & insurance purposes.
If you have any questions, just shoot me a PM! If you need a better picture of something, just let me know.
--------------------------------------------------------------
Uppers:
--------------------------------------------------------------
Agency Arms Syndicate complete G19 upper: $850
This is an Agency Arms Syndicate S2.5 complete slide for the GLOCK 19 Gen 3 pistol. All of its internals are factory GLOCK parts, including the recoil spring & rear plate. It and the included barrel were purchased in 2022 & it was never fired. The sights are TruGlo TFX Pro, purchased at the same time.
NOTE: This listing includes the red soft case that the slide came in, but I don't know where the case for the barrel is, so it will ship installed in the slide & placed in the red case.
2nd NOTE: If you don't want the installed sights, I can remove them & take $75 off.
Additional Photo 1
Additional Photo 2
Additional Photo 3
Additional Photo 4
Additional Photo 5
Additional Photo 6
--------------------------------------------------------------
Grey Ghost Precision OC V4 complete slide: $400
This is a complete Grey Ghost Precision OC V4 slide. It was completed using all new factory GLOCK 19 parts. I installed a set of XS DXT2 Big Dot (yellow) sights that would clear any optic I installed. It was assembled onto a frame, but never fired.
NOTE: If you don't want the installed sights, I can remove them & take $75 off.
Additional Photo 1
Additional Photo 2
Additional Photo 3
Additional Photo 4
Additional Photo 5
--------------------------------------------------------------
Colt .22 LR AR-15 conversion unit: $150
This is an original Colt .22 LR conversion unit for the AR-15/M-16. It is used in very good condition. I have no idea what the round count is as this used to belong to my father. It does NOT feature an auto-sear engagement, so it is for semi-auto only.
Additional Photo 1
Additional Photo 2
--------------------------------------------------------------
RMW Xtreme 7.5" DI45 .45 ACP complete upper
This is a used RMW Xtreme 7.5" DI45 .45 ACP complete upper. The muzzle is threaded M16x1LH & includes a flash hider.
I've put exactly 150 rounds of WWB through this upper on a DDLES GLF lower using GLOCK 21 mags w/ KRISS extensions loaded to 25 each.
3 mags were fired with an AAC Ti-Rant 45 & 3 mags were fired unsuppressed. There were zero issues at all.
This upper requires the use of a standard AR-15 buffer with all of its weights removed.
Extremely comfortable to shoot with a can installed. It will work with pretty much any .45 ACP configured lower using nearly any mags. It was designed to run on a lower using M3 "Grease gun" mags.
Includes the following:
1 RMW Xtreme 7.5" DI45 .45 ACP upper
1 YHM YHM-9630-DX 7.29" Diamond Series free-floating handguard (installed)
1 RMW Xtreme DI45 complete BCG (installed)
1 Colt charging handle (installed)
1 set Surefire rail ladders (installed)
1 spare RMW Xtreme DI45 complete bolt assy.
Additional Photo 1
Additional Photo 2
Additional Photo 3
Additional Photo 4
Additional Photo 5
Additional Photo 6
Additional Photo 7
Additional Photo 8
Additional Photo 9
Additional Photo 10
--------------------------------------------------------------
Optics:
--------------------------------------------------------------
Burris 2-7x32mm Handgun scope: $225
This is a Burris 2-7x32mm Handgun scope (# 200298). It features a 1" tube, nickel finish & Plex reticle. It was purchased for a Fletcher 11/22 with a rail section pretty far forward. I bought this scope thinking the generous eye relief would make it ideal. Turns out, it really is just for handgun use with arms extended. I mounted it using Leupold QRW2 rings. I followed the instructions for torque spec (25 in-lbs using a Fixit-Stick) & sequence, yet the rings still pinched the tube a bit on the right side (hence the reason for the price). If it weren't for the pinching on the right side, this scope would be like new as the rifle it was on remained in the safe & was never fired.
Additional Photo 1
Additional Photo 2
Additional Photo 3
Additional Photo 4
Additional Photo 5
Additional Photo 6
Additional Photo 7
Holosun HE530C-RD red dot sights: ALL SOLD
This is the Holosun HE530C-RD with a red reticle. It features a 30mm titanium housing (a T1 is ~20mm), 50k battery life (on setting 6 of 10 daylight, has 2 NV settings), 2 MOA dot & 65 MOA circle (circle & dot or dot selectable) & weighs 6.77oz. It uses a CR2032 battery (not included). These sights were purchased back in 2022 & installed on a few firearms but never used during live fire.
--------------------------------------------------------------
#141 Holosun HE530C-RD red dot sight SOLD to Wino Tier
--------------------------------------------------------------
Barrels:
Tactical Solutions SBX barrels:
These are Tactical Solutions SBX barrels for the Ruger 10/22 Takedown. The purpose of this barrel is to allow the use of a suppressor whilst minimally increasing the overall length. It accomplishes this because it features a “cage” that is permanently attached to the muzzle, keeping the barrel length at just over 16” whether your suppressor is installed or not. It includes a black anodized fake suppressor. I have 3 of these barrels available. They’ve been installed, but I’ve never put any rounds through them. I’m only selling as I’ve decided to just register my rifles as SBRs.
Black Tactical Solutions SBX barrel SOLD
--------------------------------------------------------------
Red Tactical Solutions SBX barrel $150
Additional Photo 1
Additional Photo 2
Additional Photo 3
Additional Photo 4
--------------------------------------------------------------
Silver Tactical Solutions SBX barrel $150
Additional Photo 1
Additional Photo 2
Additional Photo 3
Additional Photo 4
--------------------------------------------------------------
Mossberg 590/500 14” barrel kit:
3 available
These are complete, brand new Mossberg 500/590 14" barrel kits. Each kit includes 1 14" Mossberg 590 barrel, 1 5-round mag tube, 1 "short" action slide tube assy., 1 "short" forearm with strap, 1 mag tube spring, 1 follower & 1 mag tube cap. This is the complete front end of the firearm.
These kits can only be legally installed on PGO (pistol-grip only) "firearms" (500/590 shotguns that were shipped with only a pistol grip installed & no stock) when a Shockwave style grip of sufficient length is installed or as a replacement to the factory 14" Mossberg Shockwave line of firearms or on either a registered AOW (Any Other Weapon) or registered SBS (Short-Barrelled Shotgun). It is a violation of Federal law to even possess both this barrel kit & an unregistered, stock-equipped Mossberg 500/590. Non-NFA configuration requires an OAL of >26", but the barrel can be any length if installed on a PGO or Shockwave "firearm".
These kits are also compatible with the Maverick 88 line of firearms. I will only ship where legal. I have 2 of these barrel kits available. The parts shown were removed from the packaging for the first time for photos. Will ship in original box with factory label either covered or removed.
Additional Photo 1
Additional Photo 2
Additional Photo 3
Additional Photo 4
Additional Photo 5
Additional Photo 6
Additional Photo 7
Additional Photo 8
--------------------------------------------------------------
Benelli M4 18.5" barrel: $525
This is an original Benelli 18.5" barrel taken from an unfired Benelli M1014. It has some wear from the set screws of a Strike Ind. HAYL Rail M-LOK Handguard.
Additional Photo 1
Additional Photo 2
Additional Photo 3
Additional Photo 4
Additional Photo 5
--------------------------------------------------------------
Benelli M4 5rd magazine tube: $60
This is the original 5rd magazine tube & "false" magazine extension from a new Benelli M4. Includes original spring seal ring.
Additional Photo
--------------------------------------------------------------
Strike Ind. HAYL Rail M-LOK Handguard for Benelli M4: $60
This handguard has a Magpul MFG & Surefire Scout light installed previously. Includes original box & set screws (allen wrench is missing).
Additional Photo 1
Additional Photo 2
Additional Photo 3
--------------------------------------------------------------
Benelli M4 fixed stock receiver extension: $25
Take off from a new Benelli M1014. This receiver extension is the civilian fixed stock version. The internals are NOT included.
Additional Photo
--------------------------------------------------------------
Thank you for looking!
~R.E.D.
